Fairlane CP-K200T拉销种类 T型手柄
本产品可用于五金机械，家电设备，产线建设等相关行业
品 牌：Fairlane
型 号：CP-K200T(多款型号供选)
Fairlane 拉销 CP-K200T T型手柄
拉针 - 钢手柄带手柄 - 钢桶 - 1/2英寸
直径柱塞：1/2英寸
长度柱塞：9/16英寸。
身长：1-1 / 2英寸
直径体：1英寸。
长度十六进制：3/16英寸
高度处理：1-7 / 16英寸。
长度处理：2-1 / 4英寸
Diameter Plunger: 1/2 in.
Length Plunger: 9/16 in.
Length Body: 1-1/2 in.
Diameter Body: 1 in.
Length Hex: 3/16 in.
Height Handle: 1-7/16 in.
Length Handle: 2-1/4 in.
描述
这些弹簧负载拉销允许您快速缩回和接合柱塞，以进行定位，紧固和快速更换操作。 销的外壳设计为焊接到位以增强强度。 拉动手柄将柱塞完全缩回到销的壳体中。 释放手柄允许柱塞完全伸展到位。 柱塞由1038钢制成，除了5/8由12L15钢制成外，所有尺寸的抗拉强度均为90至95 KSI。 外壳由未镀12L15钢制成，用于焊接到夹具。 手柄是塑料的。 柱塞和六角形镀锌。 上拉力约为5磅。
Description
These spring load pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations. The housing of the pin is designed to be welded into place for strength. Pulling on the handle retracts the plunger fully into the housing of the pin. Releasing the handle allows the plunger to fully extend into p*osition. The plunger is made from 1038 steel providing a tensile strength of 90 to 95 KSI on all sizes except the 5/8 which is made from 12L15 steel. The housing is made from unplated 12L15 steel for welding to fixture. The handle is plastic. The plunger and hex are zinc plated. The pull up force is approximately 5 lbs.
